7
1. P0WER
Please use the provided adaptor to connect power cord (Other adaptor is not suitable for this machine).
2. EXTERNAL I/O
Controlled remotely by an external device or control system.
Alarm input, external I / O explanation.
3. 75
/ HI
When using Loop function, please switch to HI. If you don t use Loop function or disconnect the video
input, please set it as 75 .
4. VIDEO INPUT (1-16)
Connect to video source, such as camera.
5. LOOP (1-16)
Connect video signal between Input port and Loop port to make a loop.
6. AUDIO IN (1-4)
Connect to audio source, such as microphone.
IPS should be set to 25A (for NTSC) or 18A (for PAL)
4 audio inputs, but only can select 1 during recording.
7. AUDIO OUT (R/L)
Connect to monitor or speaker.
IPS should be set to 25A (for NTSC) or 18A (for PAL
)
with 2 mono audio outputs from the same source.
8. MONITOR
Connect to Main monitor
9. CALL
Connect to CALL monitor. Show the Switch Display. When alarm trigger happens, the call monitor will show
the triggered channel for a period of time.
B A CK PA N EL
LOOP
EXTERNAL I/O
POWER
INPUT
WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IN
CALL
AUDIO
MONITOR
OUT
AUDIO
