RP3014E-50 -
6
- Oct, 2016
IMPORTANT ADVICE :
The manufacturer declines all responsibility for loss or damage resulting from misuse or any modification
or alteration that does not conform to the manufacturer’s original specifications.
At the workstation, the sound pressure level may exceed 85 db (A). In this case individual protection
measures must be taken
SPARE PARTS ORDERING :
When ordering spare parts, please mention machine serial no., part no. and description.
SCRAPPING :
In the event of deterioration and scrapping of the machine, the following items must be disposed of in
accordance with the requirements of the legislation in force.
Main Materials:
1. Motor : Aluminium (AL), Copper (CU), Polyamide (PA)
2. Machine : Steel sheet (AC)
MAINTENANCE SCHEDULE :
Check all external screw connections for tight fit approx. 8
hours after first operation.
Parts
Maintenance
Maintenance
interval
General Remove all dirt, stones etc.
from the compactor after each
day of operation..
daily
Belts
Check tension and wear –
replace if necessary.
weekly
Motor
See Motor manufacturers
handbook
MAINTENANCE :
Monthly maintenance
:
•
Perform maintenance work on Motor according manufacturer’s instructions.
•
Check belt tightness and tighten if necessary.
Belts should be move 10 –15 mm when pushed by the thumb.
•
Check and retighten bolts and nuts.
The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve
the right to make any and all technical modifications without prior notice.