background image

IMPORTANT SAFETY INSTRUCTIONS

OWNER’S MANUAL

When using your 

EURO-PRO

Garment Steamer

, basic safety precautions 

should always be observed, including the following:

(<

52

35

2

Model SC620

SAVE THESE INSTRUCTIONS

1

For Household Use Only

Rev. 0402A

To reduce the risk of fire, electric shock, or 

injury:

Do not

leave the Garment Steamer plugged 

in when unattended.  Unplug the electrical 

cord when not in use and before servicing or 

refilling water tank.

Do not

allow  to be used as a toy.  Close 

attention is necessary when used by or near 

children, pets or plants.

Use only as described in this manual.  Use 

only manufacturer’s recommended 

accessories.

Do not

pull cord, use cord as a handle, close 

a door on cord, or pull cord around sharp 

edges or corners.  Keep cord away from 

heated surfaces.

Do not

use extension cords or outlets with 

inadequate current carrying capacity.

Turn off all controls as applicable before 

unplugging from electrical outlet.

Do not

unplug by pulling on cord.  To unplug, 

grasp the plug, not the cord.

Do not

handle plug or steam cleaner with wet 

hands or operate without shoes.

Do not

put any objects into openings.  Do not 

use with any opening blocked.

Store your appliance indoors in a cool, dry 

area.

Keep your work area well lit.

When in use, never turn the appliance over 

or on its side.  Never direct steam towards 

people, animals or plants.

Do not

immerse the steam cleaner into water 

or other liquids.  Always unplug the power 

cord from the electrical socket when filling the 

steam cleaner.

Do NOT add cleaning solutions, scented 

perfumes, oils or any other chemicals to 

the water used in this appliance as this 

may damage the unit or make it unsafe for 

use.

Use tap water or distilled/purified 

water if the tap water in your area is very hard.

Always

allow  the appliance to cool 

completely for at least 30 minutes before 

storing.

Only hang the steamer hose on the supplied 

hanger rod.

Always

disconnect the unit from electrical 

outlet before filing with or removing water. Be 

careful to 

AVOID

spilling excess water into the 

reservoir when removing or placing the 

reservoir bottle into the reservoir.

1.

Read all instructions before using your 

Garment Steamer.

2.

Use the system only for its intended use.

3.

To protect against a risk of electric shock, 

do not immerse any part of the system in 

water or other liquids.

4.

Never yank cord to disconnect from 

outlet; instead, grasp plug and pull to 

disconnect.

5.

Do not

allow cord to touch hot surfaces.  

Let the system cool completely before 

putting away or opening water tank 

(removing the safety cap).  Wrap cord 

loosely around system when storing.

6.

Always disconnect system from electrical 

outlet when filling with water or emptying 

and when not in use.  Always turn the 

safety cap slowly when opening the water 

tank .  This will allow any remaining steam 

to escape gradually.

7.

Do not

operate the system with a damaged 

cord or plug, or if the appliance or any other 

part of the system has been dropped or 

damaged.  To avoid the risk of electric 

shock, do not disassemble or attempt to 

repair the Garment Steamer.  Return the 

system to 

EURO-PRO

Corporation (see 

warranty) for examination and repair.  

Incorrect re-assembly or repair can cause a 

risk of electrical shock or injury  to persons 

when the Garment Steamer is used.

8.

Close supervision is necessary for any 

appliance being used by or near children.  

Do not leave the system unattended while 

connected.

9.

Burns can occur from touching hot metal 

parts, hot water or steam.  Use caution 

when draining unit after use as there may 

be hot water in the unit.  Never direct steam 

at any person.  The steam is very hot and 

can cause burns.

10.

Do not

operate in the presence of 

explosive and/or flammable fumes.

11. This appliance is intended only for 

household use.  Follow all user instructions 

in this manual.

12. Never use any chemicals or substance 

other than tap water in the machine.  Use of 

chemicals may damage the machine.  Use 

of chemicals will automatically void your 

warranty.

13.

Be careful

. Burns can occur from touching 

HOT METAL PARTS, HOT WATER OR 

STEAM.

Garment Steamer

For information or assistance:

EURO-PRO  

Corporation

178 West Service Rd.

Champlain, NY 12919

1-800-798-7398

www.euro-pro.com

Summary of Contents for SC620







Reviews: