background image

FEATURES

OPERATING INSTRUCTIONS

Your

Steam Mop

utilizes steam to remove tough grease,dirt and grime. Steam is 

nature’s purest and most powerful cleaner for safely cleaning all hard floor surfaces in 
your home without harsh chemicals, thus being perfectly ecological.  Cleans your tile, 
hardwood , linoleum and  vinyl floors.

How To Assemble & Use

6. Plug the unit into a standard 120 volt 

grounded wall receptacle. 

7. Press the On/Off button to turn the 

unit on. The power ‘On” light  will light 

up. It takes the unit approximately 

two - three (2-3) minutes to heat up.

8. When there is no more water in the 

water tank, the empty light (red) will 

go on. 

9. To refill the water tank, turn the unit 

off and unplug from the electrical wall 

outlet and let the unit cool for 30 

seconds. Then remove the filling cap 

and pour in the water. You do not 

have to wait for the unit to cool down 

before you refill.

10. When you have finished using the 

steam mop, turn the unit “Off” and 

wait until the steam mop cools down 

for approximately five (5) minutes 

before removing the micro-fiber 

cleaning cloth or bonnet (optional) 

from the base.  Please note that the 

micro-fiber cleaning cloth or bonnet 

(optional) gets very hot with the 

steam.

11. Never leave the micro-fiber cleaning 

cloth or bonnet (optional) on the unit 

when you have finished using the 

steam mop. Always remove the 

micro-fiber cleaning cloth or bonnet 

(optional) and wash in warm water 

with a mild detergent. Never use 

bleach or fabric softener when 

cleaning the micro-fiber cleaning 

cloths or bonnet (optional). The 

micro-fiber cleaning cloth or bonnet 

(optional) can be washed in a 

washing machine and dried in a 

clothes dryer but on a low heat 

setting. We recommend that you air 

dry for 24 hours.

CAUTION:

Use a grounded receptacle.  Use only a heavy duty extension 
cord rated for 15 amps minimum - Do not use an ordinary 

extension cord.

IMPORTANT:

Do 

NOT

add cleaning solutions, scented perfumes, oils or 

any other chemicals to the water used in this appliance. 

Use regular water or distilled/purified water if the tap 

water in your area is very hard.

WARNING:

Your Steam Mop is designed to clean hard floor surfaces that 
will withstand high heat. Do not use on unsealed wood or 

unglazed ceramic floors. On surfaces that have been treated 

with wax or some no wax floors, the sheen may be removed by 

the heat and steam action. It is always recommended to test an 

isolated area of the surface to be cleaned before proceeding. 

We also recommend that you check the use and care 

instructions from the floor manufacturer.

1. Remove all the parts from the 

packaging.

2. Insert the ergonomic handle into the 

tube pivot of the main unit.

3. Place one of the micro fiber cleaning 

cloths or bonnet (optional) on the 

bottom of the steam mop. Make sure 

that the micro-fiber cleaning cloth or 

bonnet (optional) is firmly attached to 

the bottom of the steam mop. (Fig. 1)

4. Place the steam mop on the floor 

protector pad and open the filling 

cap.

5. With the help of the filling flask, pour 

1 cup of water (8 oz.) Into the unit. do 

not overfill..  Replace filling cap when 

finished. (Fig. 2)

IMPORTANT:

Always insure that the 

unit is “UNPLUGGED” from the wall 

receptacle prior to initial filling and before 

attaching the micro-fiber cleaning cloth to 

the base of the appliance. 

Never

use the 

steam mop without the micro-fiber 

cleaning cloth or bonnet (optional) 

attached to the base.

Always let unit cool for at least 5 minutes 

before removing the micro-fiber cleaning 

cloth or before emptying the water tank.

IMPORTANT: 

Never

leave the appliance in one spot on any surface 

for any period of time.  Always place the appliance on the 

floor protector pad and make sure that the appliance is 

turned off.

Fig. 1

Fig. 2

WARNING: Colors may bleed 

during first wash.  Be careful when 

machine washing or drying with 

mixed fabrics as micro-fiber cloths 

will pick up lint from other fabrics.

Using The Micro-Fiber 
Bonnet 

(Optional)

If you wish to use the micro-fiber bonnet 

(optional), follow same instructions as 

above, except that you slip the bonnet  

(optional) over the main unit.

4

5

Reviews: