background image

3

Before Using Your Deep Fryer

DO NOT immerse the deep fryer in 
water. Filter is NOT washable.  Always 
remove the filter from the cover before 
washing the cover. 

Make sure the fryer is unplugged. Wash 
the fryer basket and cover in hot, soapy 
water. Wipe dry thoroughly. Wipe the 
inside of the oil reservoir with a damp 
cloth and wipe dry thoroughly before 
adding the oil.

Warning: 

All components must be 

completely dried before filling with oil or 
using.  Special care must be taken to 
ensure the filter compartment and cover 
are completely dry, otherwise the filter 
will not function properly and may lead to 
steam being trapped within the fryer 
during use.

OPERATING INSTRUCTIONS

Assembling Your Deep Fryer
Caution

: Never turn on the deep fryer 

when the oil reservoir is empty. Always 
ensure the deep fryer is out of the 
reach of children. Always use the deep 
fryer on a flat, heat resistant surface.

1.  Place filter into filter compartment. 

Insert filter cover and snap (lock) into 
place. 

2.  Make sure the temperature control is 

in the “Off” position. 

3.  Attach the “break-away” safety cord. 

The top of the cord can be identified 
by the “THIS SIDE UP” raised print. 
(Fig. 1) When attaching cord - you will 
feel a magnetic pull on the cord when 
attaching cord correctly. 

Fig. 2

Max level 

for cooking 

oil.

Fig.  1

“This Side Up”

5.  To attach the handle to the fryer 

basket, pinch the two handle ends 
together to insert the metal part of 
the handle inside the basket handle 
bracket on the fryer basket. (Fig. 3) 

4.  Pour cooking oil into the oil reservoir 

until the oil level is between the 
“MIN” and “MAX” marking on the 
inside of the oil reservoir. 

Do not 

exceed the “Max” level for cooking 
oil.  (Fig. 2)

Press together 

here.

Fig. 3

MAX

• 

Use blended vegetable oil, pure corn 
oil or canola (rapeseed) oil.  

Do not 

use olive oil, margarine, lard or 
drippings. 

• 

The oil level must always be 
maintained between the minimum and 
the maximum levels marked inside the 
oil reservoir. (Fig. 4) Check the oil level 
before each use. For best results, keep 
the oil close to the maximum level (4 
cups / 1 liter).  

Never 

mix different oils 

and fats together.  

Do not 

mix old and 

new oil.

Filling the Oil Reservoir With Oil
Warning: 

Never 

plug in the deep 

fryer before filling with oil to specified 
level.

Fig. 4

Oil level
indicator

Using Solid Fat
Warning: 

It is 

NOT RECOMMENDED 

to put solid shortening in the oil reservoir 
or the fryer basket.

• 

If using solid vegetable shortening, 
melt it first in a separate pan and then 
very carefully pour the melted fat into 
the oil reservoir.

• 

Previously used solid vegetable 
shortening which has curdled and 
hardened in the oil reservoir should be 
removed from the oil reservoir and 
melted in a separate pan before 
reusing.

Caution: 

If you try to melt the solidified 

fat in the oil reservoir, there is a risk of 
warm melted fat suddenly sputtering from 
below through the still solid top layer of fat.  
Therefore use only the following procedure:

• 

Make sure the fat is at room 
temperature.  If the fat is very cold, 
there is a greater risk of splashing.

• 

Using a fork, carefully make some 
holes in the fat.  Make sure the cover is 

securely closed while fat is melting. 

Heat fat slowly - on lowest temperature 
setting.

OPERATING INSTRUCTIONS

Fig. 5

Using Your Deep Fryer
Caution

: Never turn on the deep 

fryer when the oil reservoir is 
empty. Always ensure the deep 
fryer is out of the reach of children. 
Always use the deep fryer on a flat, 
heat resistant surface.

1.  Place the basket in the deep fryer. 

Then place the cover on deep 
fryer. 

2.  Turn the temperature control to 

the desired temperature setting. 
The indicator light will turn on. 

3.  When cooking oil reaches the set 

temperature, the indicator light 
will go out. 

Note

: The indicator light will cycle off 

and on during the frying cycle as the 
unit maintains the selected 
temperature. 
4.  To remove the cover, hold it from 

the handles and tilt the cover 
away from you to allow steam to 
escape before removing the 
cover completely. (Fig. 5)

6.  When cooking is complete, tilt the 

cover away from you to allow hot 
steam to escape.

7.  Remove the cover completely. 
8.  Using an oven mitt or a pot holder, 

lift the frying basket and hook the 
basket onto fryer basket holder 
mount to allow the food to drain. 
(Fig. 6)

Caution

Always use an oven mitt or a 

pot holder to remove the fryer basket as 
the handle may get hot while frying. 

Oil is very hot and can cause severe 
injury. 

9.  Remove the food from the fryer 

basket by lifting basket by its handle 
and 

CAREFULLY 

pouring the food 

onto a plate covered with paper 
towels or into desired serving 
container or by using tongs to 
remove the food from the frying 
basket and placing onto the serving 
container.

10.  Repeat procedure for remaining food 

to be cooked. 

11.  When the cooking is complete, turn 

the deep fryer off, unplug and allow 
the oil to cool for approximately 2 
hours before attempting to remove 
the oil or clean the fryer.

Important: 

Always replace or remove 

the frying basket carefully when cooking.

Caution

: Never touch any metal parts 

on the deep fryer as they may be hot.

Warning: 

Never use the break-away 

safety cord to turn the deep fryer “Off”. 
Always turn unit Off by using the 
temperature control first. Disconnect the 
power cord from the wall outlet. Use only 
the power cord provided with the deep 
fryer. Use of any other magnetic cord 
could cause fire, electric shock or injury.

Fig.  6

Fryer basket 
holder mount

5.  Lift the fryer basket onto the fryer 

basket holder mount. (Fig. 6) Place 
food into the fryer basket, carefully 
lower the fryer basket back into the 
heated oil and replace the cover.

4

Reviews: