Once all the desired attachments and
the high pressure hose are attached to
the pressure washer, you can connect
the garden hose to the unit.
1. Make sure that the water intake filter
is inside the water intake inlet.
(Fig. 5)
2. Attach the male adapter (supplied)
to the water intake connector on the
front side of the unit. (Fig. 5)
3. Attach the female hose coupling to
the garden hose. (Fig. 5)
4. Connect the female hose coupling
to the male adapter making sure
that it is secured in place.
(Fig. 5)
Fig. 5
Water inlet
Garden hose
(not supplied)
Hose
connector Garden hose
coupling
Fig. 4
High Pressure
Output
(Lower Connector)
Fig. 2
1. While facing the front of the unit
attach the high pressure hose to the
high pressure output connector on
the front side of the unit. Twist on
securely to avoid leakage. (Fig. 2)
2. Then ensure that the other end of the
high pressure hose is fastened
securely to the trigger gun. (Fig. 3)
Fig. 3
3. Once the high pressure hose is
connected to the trigger gun, you can
attach the lance, brush or soap
dispenser accessories. To attach
either the lance or the brush to the
trigger gun, hold the trigger gun in
your left hand insert the desired
accessory and push it in all the way
into the connector on the trigger gun
and turn it clockwise 60° until it locks
in place. To remove the attachment,
push down on the attachment and
turn counter-clockwise 60° and then
pull out. Make sure that the
attachments are securely locked in
place before use. (Fig. 4)
This high pressure washer is suitable for
non-professional use. The working
temperature must range between 40°F
and 120 °F. The machine is supplied with
a trigger gun, equipped with a trigger
handle to offer a comfortable working
position.
The high pressure washer is suitable for
washing with cold water only. The water
that you use for the pressure washer
must not be dirty, sandy or contain any
corrosive chemical products.
The pressure washer may be used to
wash shutters, doors, tiles, cars, decks,
campers, etc., where high water pressure
is necessary to remove dirt.
With the detergent tank, the pressure
washer can be used to apply a thick
coating of aerated detergent to the areas
being cleaned .
When using the pressure washer we
recommend the use of personal safety
items to reduce the risk of accidental
injury.
After you open the package, check to
make sure that all the parts are in the box
as per parts that are illustrated on page 3
of this guide. Due to transport and packing
restraints, some accessories may be
supplied unassembled; in this case follow
the assembly instructions in this manual. If
you have any questions, call customer
service at 1 (800) 798-7398. Keep all
small and potentially harmful parts of the
packaging (plastic bags, foamed
polystyrene, nails, etc.) out of the reach of
children.
Suitable Use of Your Pressure
Washer
• Place the pressure washer in a safe
area and on a horizontal surface.
• When using the pressure washer,
hold the trigger gun firmly with one
hand on the handle and the other on
the lance. (Fig. 1)
Correct Use of the Pressure
Washer
Fig. 1
•
NEVER
point the water jet at electric
wiring, at the pump unit, or at any
person or animal.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Unpacking Your Pressure Washer
Attaching High Pressure Hose to
Pressure Washer
Garden Hose Connection
4. After all the connections have been
made and
BEFORE
you plug the
pressure washer into an electrical
outlet, open the water supply and
press on the trigger switch in order to
remove any air which may be in the
hose or pump. Continue to press on
the trigger switch until you get a
constant flow of water coming out of
the trigger gun. Allow water to flow
for 30 seconds.
5. Once this is accomplished, release
the trigger switch. Engage the safety
lock on the trigger
6. Ensure that the "On/Off" switch, at
the side of the unit, is on the "Off"
position, then plug the unit into an
electrical outlet and turn the unit to
the "On" position.
7. Now you are ready to use the
pressure washer. Disengage the
safety lock and depress the trigger on
the trigger gun.
5
6
