background image

Juice Extractor

CAUTION: Make sure that the unit is unplugged from the power 
source and the operating button is “OFF” before inserting or 
removing attachments.

1. Fit the processor bowl as detailed previously (page 4).
2. Fit the juice extractor/filter (28) into the processor bowl.
3. Fit the juice extractor lid (29) over the extractor and rotate 

counter clockwise ensuring that the lid tab has clicked into place.

4. Plug in processor.
5. Turn speed control to low (use only on low speed).
6. Use the juice extractor pusher (30) to add fruit into the food tube.
7. If the juice extractor becomes clogged during use, turn the 

processor off and remove the pulp from it using the spatula.
Be sure to switch the appliance to “OFF” position after each use.  
Make sure the motor stops completely and unplug the unit before 
disassembling.

FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING 
FRUIT INTO THE FEEDER TUBE - NEVER FEED BY HAND.

Do not put your fingers or other objects into the juicer opening
while it is operation.  If food becomes lodged in the opening, use 
food pusher or another piece of fruit or vegetable to push it down.  
When this method of removing food lodged in the opening is not 
possible, turn the motor off, unplug unit and disassemble juicer to 
remove the remaining food.

CAUTION: Make sure that the unit is unplugged from the power source and the operating 
button is “OFF” before inserting or removing attachments.

1. Fit the processor bowl 

as detailed previously 
(page 4).

2. Fit the citrus juice filter 

(31) into the processor 
bowl.

3. Rotate counter 

clockwise. Ensure that 
the citrus juice filter tab 
has clicked into place.

4. Insert the juice reamer into the center 

of the citrus juice filter (31) with its shaft 
inside the central column of the bowl.

5. Plug in processor.
6. Place fruit on juice reamer and hold with 

a cupped hand.

7. Operate at lowest speed.

WARNING: ALWAYS OPERATE THE 
JUICER AT LOWEST SPEED ONLY.  
DO NOT OPERATE THE CITRUS 
JUICER AT HIGHER SPEEDS.

WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED 
ONLY.  DO NOT OPERATE THE CITRUS JUICER AT HIGHER 
SPEEDS.

Citrus Juice Filter (31)

8

Summary of Contents for EP90















Reviews: