background image

11

TO ADD WATER

• Unplug iron from the electrical outlet.

• Follow instructions to empty the iron.
• Then, follow the instructions for filling the iron.

Following this procedure will ensure that you do not overfill the iron.

SELF-CLEANING

In order to remove calcium and built-up particles, the self-cleaning system should be run at least 

once a month.
• Fill the watering beaker provided to the half-full mark and then pour into the water reservoir.
• Set the variable steam control (4) to the no steam position.
• Insert the main plug into the wall socket.
• Set the temperature control dial (9) to the maximum temperature.
• Wait until the thermostat light (3) goes off and steam iron has reached preset temperature.
• Remove the plug from the wall socket.
• Hold the steam iron horizontally over a sink.
• Turn the variable steam control (4) to “Self-Clean           ” position. Hot water and steam will 

be emitted from the soleplate.  Swing the steam iron lightly back and forth gently to allow lime 
and dust particles to come out.    

• When the water reservoir is empty, shift the variable steam control from “Self-Clean” position 

to “0”.

• Stand the iron upright and insert the plug into the wall socket to let the iron heat up again.
• Move the iron over a clean cotton cloth to clean the soleplate and let the remaining water on 

the soleplate evaporate.

Summary of Contents for EP480

















Reviews: