OPERATING INSTRUCTIONS
CONTENTS
Warning:
Always remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
• Follow the cleaning instructions on
page 4. (Before using for the First
Time)
•
Never
immerse the control panel, cord
or plug in water or any other liquid.
•
Do not
place the control panel, cord or
plug in the dishwasher.
• Clean the control panel only with a
damp cloth.
• The oil container, frying basket, lid
cover and filter can be washed in the
dishwasher.
• The body of the deep fryer can be
washed in warm soapy water.
Do not
put the body of the deep fryer in the
dishwasher.
Cleaning Instructions
Connecting the Detachable
Power Supply Cord
Your deep fryer has been specifically
designed with your safety in mind. This
unit has a unique detachable power supply
cord. This power supply cord is designed
to “Break Away” from the fryer body in the
event that the supply cord is inadvertently
pulled. This is intended to prevent the
tipping of the appliance and hazardous
spillage of hot oil.
The female receptacle portion of the power
supply cord is permanently attached to the
rear of the the control panel. To connect
the male power cord plug to the female
receptacle on the appliance, orient the
male plug so that it mates with the female
receptacle. The male plug can only be
inserted one way. If the male plug will not
go into the receptacle on the appliance,
rotate the male plug 180° and insert again.
Important:
Should the male plug become
detached from the appliance during use, it
is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
• Push the thermostat reset button
located on the back of the control
panel. (Fig. 8) The unit will beep to
indicate that it has re-set.
If for some reason the deep fryer stops
heating, the reason might be that the
safety reset switch has disconnected. To
reconnect the the deep fryer, follow the
instructions listed below:
How To Reset the Deep Fryer
RESET
Reset
Fig. 8
Important Safeguards ………………………………………………………….. 1
Special Safety Instructions ……………………………………………………. 1
Main Components ……………………………………………………………... 3
Using for the First Time …………….…………………………………………. 4
Prior to First Use, Clean the Unit Thoroughly …….…………………………. 4
Filling the Stainless Steel Container With Oil …………..……………………. 4
Using Solid Fat …………..……………………………………………………… 5
Installing the Control Panel Into Its Place ……..……………………………... 5
Using the Electronic Deep Fryer ………………………………………………. 5
Pre-Heating ………………….………………………………………………….. 6
Filling the Frying Basket ……….………………………………………………. 7
Frying Food …………………………………….……………………………….. 7
At the End of Cooking ………………….………………………………………. 7
Frying Tips ……………………………..………………………………………... 7
Temperature Settings ………………………………………………………….. 8
Filtering and Changing the Oil ………………………………….…………….. 8
Connecting the detachable Power Supply Cord ……………………………. 9
Cleaning Instructions ……………………….………………………………….. 9
How to Reset the Deep Fryer …………………………………………………. 9
Helpful Hints …………………………………………………………………….. 10
9
2
