76
GB
tine assembly can still be moved.
h)
Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
i)
When the machine is stopped for servicing,
inspection, or storage, or to change an accessory,
shut off the power source, disconnect the machine
form the supply and make sure that all moving parts
are come to a complete stop. Allow the machine to
cool before making any inspections, adjustments,
etc. Maintain the machine with care and keep it
clean.
j)
Store the machine out of the reach of children.
5- Recommendation
a)
The machine should be supplied via a residual
current device (RCD) with a tripping current of not
more than 30 mA.
b)
Avoid using the machine in bad weather
conditions especially when there is a risk of
lightning.
c)
When using the extension cord must not be
lighter/thinner than the used cable (H05VV-F),
whose section is not less than 1.0 mm
2
.
d)
Not overreach and keep the balance at all times,
always be sure of the footing on slopes and walk, never
run.
e)
Not to touch moving hazardous parts before the
machine is disconnected from the mains and the
moving hazardous parts have come to a complete stop.
f)
Don't connect a damaged cord to the supply or touch a
damaged cord before it is disconnected from the supply
