remaining water is collected within the wine cooler for humidity purposes. All
Euro beverage coolers are equipped with a double glazed glass door to
minimize condensation on the glass door. The unit is not totally sealed, fresh air
admission is permitted through the drainpipe. Air is circulated through the
beverage cooler by means of a fan /fans and the hollow shelves.
Notes: The water collected by condensation, is therefore recycled. Under
extremely dry environmental conditions, you may have to add some water into
the water container provided with your wine cooler. During the refrigerating
cycle, heat is given off and disperses through the external surfaces of the
beverage cooler. Avoid touching the surfaces during those cycles.
*
Reversing the Door Swing of Wine Cooler
This appliance has the capability of the door opening from either the left or right
side.The unit is delivered to you with the door opening from the left side. Should
you desire to reverse the opening direction, please follow the instructions below:
Note: All parts removed must be saved to allow the door swing to be reversed.
1.
Disconnect the power and take out all the beverages. Carefully lay or lean
the beverage cooler on its back. Use cushioning to protect the floor and the
wine cooler.
2.
Open the glass door and remove the two lock screws (2) holding the door
shaft assembly (3) to the glass door. Before careful to hold the glass door
firmly after removing the screws. (Fig.1).
3.
Lift up the removed glass door and place it on a padded surface to prevent
