Euresys EureCard Grablink Series, Manual

Page: 11 / 74

Standard Compliance
11
Standard Compliance
Following notices apply to :
•
GRABLINK Value
•
GRABLINK Avenue
•
GRABLINK Expert 2
•
GRABLINK Value cPCI
•
GRABLINK Expert 2 cPCI
Notice for USA
Compliance Information Statement (Declaration of Conformity
Procedure) DoC FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation or when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Notice for Europe
This product is in conformity with the Council Directive
89/336/EEC amended by 92/31/EEC and 93/68/EEC
This equipment has been tested and found to comply with EN55022/CISPR22 and
EN55024/CISPR24. To meet EC requirements, shielded cables must be used to connect a
peripheral to the card. This product has been tested in a typical class B compliant host system. It
is assumed that this product will also achieve compliance in any class B compliant unit.