8
How to use accessories
CAUTION
When using tools, always place
vacuum in upright position.
Make sure vacuum cleaner is
turned off while attaching tools.
• Place vacuum in upright position.
• Turn hose end counterclockwise to
unlock. Pull up on hose end to
release (Fig. 1).
• To prevent vacuum from tipping
over while using accessories,
insert hose clip into opening on
back of vacuum. Press clip in to
snap into place (Fig. 2).
• Use slide on hose end to adjust
suction power (Fig. 3).
Using accessories with hose only
• Push desired tool directly onto end
of hose (Fig. 3).
Using accessories with handle
as extension wand
• Push end of hose into top of
handle and twist clockwise into
locked position. On NEU526,
open cap first. (Fig. 4).
• Push handle release latch and
pull out handle/extension wand
(Fig. 5).
• Push desired tool onto end of
extension wand (Fig. 6).
• When finished using accessories,
twist hose counterclockwise and
pull off handle. Slide handle into
top of vacuum cleaner and push
down until it clicks (Fig. 7).
• Squeeze sides of hose clip to
release it from back of vacuum.
(Fig. 8). Reposition hose over
retainer and push loose end
securely into hose inlet.
• Store tools on vacuum cleaner;
wrap cord.
3
5
Eureka Customer Service HELPLINE 1-800-282-2886
2
1
7
8
6
*NEU526
4
NEU520.qxp_NEU520 10/29/18 2:39 PM Page 8
*NEU529
