Eureka NES510 Series, Owner'S Manual

Page: 9 / 24

1. Release
latch
2. Pull out
!
!
Make sure vacuum cleaner is turned off and not
plugged into a power source.
Do not attempt to remove belt.
Call the Eureka Customer Service HELPLINE
at 1-800-282-2886.
24h
1. Release
latch
2. Pull out
1. On front of hand vac, locate the latch
and pull to remove plate and take out
the back of the hand vac, locate the
latch to remove the vented plate and
4. Click corresponding plates back
into place.
Never operate vacuum
in proper position.
Moving parts!
If debris cannot be removed easily, remove retainer to access
and remaining debris.
Click the dust cup release button, located
on the bottom of the dust cup to detach it
from the unit, and pull dust cup out.
Use handle on top of dust cup to remove
lid, empty dust cup and replace lid.
To reassemble:
2. Press other end into slot.
3. Place retainer back in place and put in screws and turn to
www.eureka.com
9
2
3
1