www.eureka.com
11
Steam mop maintenance
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from electrical
outlet before performing maintance of troubleshooting.
!
C A U T I O N
Note:
We recommend replacing your mopping pad at least every 3 months following normal use.
If you notice loose threads you can trim, do not pull the thread.
1. Unplug the cord from the outlet and let steam mop cool down for 2-3 minutes before disassembling.
2. Remove mopping pad from floor nozzle.
3. Mopping pad can be machine or hand washed in warm water with a mild liquid detergent and
thoroughly rinsed. Pad can ben tumbled-dried on low or air dried for at 24 hours. Note: Do not use bleach,
fabric softeners or powdered detergents to clean the pad.
4. Empty the water tank and allow to dry thoroughly before storing, do not close plug.
5. Wipe any ezcess liquid from the bottom of the floor nozzle and the area under where the water tank
sits.
6. Allow hose and attachments to thoroughly dry for at least 24 hours.
7. Wrap the electrical cord around the cord wrap hooks.
8.Store the mop in a cool, dry place and make sure the mopping pad in NOT attached for storage.
