Instruction manual
2-in-1 Cordless vacuum cleaner
13
Handheld unit
- Press the release button on the handle to remove the handheld unit.
Now you can attach an accessory, such as the crevice nozzle.
- To replace it in the main unit, remove the accessory and place the lower
end of the handheld unit into the designated recess, pressing down on
the handle until you hear it click into place.
The handheld unit can also be plugged directly into the mains.
The socket is on the side of the handheld unit’s handle.
Charging the battery
!
Only charge the battery with the supplied charging cable.
Always use the original batteries.
- Disconnect the cable from the mains when it is not in use.
The charging indicator light
When charging:
- The first LED is blinking - 1-40 % charged.
- The second LED is blinking, the first LED is lit up - 40-70 % charged.
- The third LED is blinking, the first two LEDs are lit up
- 70-99 % charged.
- When all three LEDs are lit up, the battery is fully charged.
During use:
- All three LEDs are lit up: 60-100 % capacity.
- Two LEDs are lit up: 30-60 % capacity.
- One LED is lit up: 10-30 % capacity.
- One LED is blinking: 1-10 % capacity.
- If all three LEDs are blinking, a fault is indicated.
See the ’Troubleshooting’ section.
Release
button
