1 2
2.2
Display Panel
3. Heater Assembly
Attach the Glass Base to the bottom of the Body of the heater as shown in Picture 1
using the included screws and bolts.
Put the heater on a stable surface, then push the button at the bottom of the heater.
Picture I
Operation Instruction
1.
Ensure that you plug your Tower Heater into a standard (120VAC,60Hz)
outlet.
2.
Press the power switch at the base back of the heater.
If you don’t hear
a 2-beep sound, it means the top (on/Off) button which printed is not on.
Ensure that the Heater is on a level surface. If the surface is not level the
heater may not function properly.
3.
To power on the heater press the
ON/OFF
button. If you press the
power button again, the heater will enter a standby mode. Once the
heater is running the following functions are available:
Power Indicator can be on
Low
or
High
Swing
：
Off = No indicator, On =
Swing light will be on
Timer
：
1H
、
2H
、
4H
、
8H, or no timer icon
Power indicator light: On/Off icon will light up when the heater is on.
4.
To toggle between full and half power
，
press
HEATER
If the heater is functioning at half power when you press the
HEATER
Button it will take 10 seconds before switching to full power.
5.
Press
SWING
button to toggle oscillation on and off.
6. To set the timer, press the
TIMER
button.
Press
TIMER
button once, the indicator will show
1H on, press the
TIMER
again, the indicator will show 2H and so on up to 8 hours.
High power
indicator
Low power
indicator
High and low
power touch
key
On/Off
key
Swing
indicator
Power
indicator
Timer
touch
key
Swing
touch key
