Eureka Blaze Plus, Instruction Manual

Page: 8 / 20

6
Auto Surge (Continuous Steam)
1. Fill the water tank in accordance with the instructions in the “Filling with
Water” section.
2. Plug the cord into the outlet and ensure that the steam button is OFF.
3. Choose the fabric temperature desired.
4. The light “ON” indicates that the iron’s temperature is increasing
steadily. Once desired temperature is reached, the light will turn “OFF”
automatically. DO NOT press the steam button until the heating light is
turned OFF.
5. The auto-surge button will emit a blue light to show that it is OFF.
6. According to your fabric’s requirement, adjust the Steam Adjustable
Control knob by turning right for more steam and left for less steam.
7. Once you have chosen your desired temperature and steam setting,
click the auto-surge button on your grip soft handle to activate the
built-in pump that allows for continuous powerful bursts of steam.
You may let go of the button once you have clicked it as one click is
enough to activate continuous steam.
8. When continuous steam is automated, the auto-surge function light
turns pink.
9. To turn OFF, simply click on the auto-surge button again.
This function is specially designed to remove the toughest wrinkles and creases present in heavy fabrics. To achieve strongest
steam discharge make sure that the thermostat dial is set at the MAX mark and that the steam surge knob is turned to MAX.