Heat Settings
Heat Setting DOWN
Heat Setting UP
9. CAUTION! Avoid any contact with the iron during the cleaning
process and firmly hold it above the sink to prevent any burns.
10. You can repeat the self-cleaning process if there are still some
leftover impurities.
11. Dry up the soleplate by plugging the iron into the outlet. It will heat
up the soleplate and evaporate water droplets.
12. Disconnect the iron from the power outlet once it reaches the
required temperature. Then carefully remove any water stains with a
piece of dry cloth.
13. Before storing, make sure the iron cools down completely.
12
11
Self-Clean
Button
5. Indicator light will turn off once the iron reaches its optimal working
temperature.
6. Once the indicator light goes off, turn the thermostat dial to OFF and
disconnect the iron from the power line.
7. Firmly hold the iron over the sink and press/hold the self- cleaning button
for several seconds.
8. Shake the iron back and forth while pressing the self-cleaning button.
Steam and boiling water will expel along with impurities and other
contaminants. (As shown in the following fig. on this page)