Eureka 8851AVZ, Owner'S Manual, Page: 6 / 8

Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
4
1) Remove HEPA filter. See directions
on page 2 for removing the HEPA filter.
2) Unscrew the lens and remove old
bulb (Fig. 10).
3) Push in new bulb, replace lens cover
and replace screw (Fig.11).
4) Replace HEPA filter, filter door, foam
filter and frame. Secure dust cup.
Change Light Bulb
Make sure vacuum is turned off and power cord is unplugged.
How to replace brush roll or belt
1) Use handle release to lower handle.
Turn vacuum over and remove
4 screws (Fig. 1).
2) Turn vacuum over to front side and
remove brush roll cover (Fig. 2).
3) Slide belt off brush roll motor gear.
Remove the brush roll and belt ( Fig. 3).
4) Place new belt around the brush roll.
Place brush roll into the base, then
place belt onto the motor gear (Fig. 4).
5) Rotate brush roll 2 turns to center
belt (Fig. 5).
6) Replace brush roll cover (Fig. 2).
7) Replace screws
˜
&
™
closest to
the brush roll first. Then replace
screws
Œ
&

(Fig. 6).
!
!
Fig. 2
Fig. 4 Fig. 5 Fig. 6
Fig. 1
Œ
Ž 
Œ
˜ ™


Fig. 7 Fig. 8
Fig. 10
Fig. 11
Fig. 9
Fig. 3
Check Brush Roll Light
Turn vacuum off and unplug if
indicator light turns on.
1) Remove debris that caused the brush roll
motor to stall (Fig. 7).
Brush Roll Reset Button
1) Press reset button on the side of the brush
roll cover to reset motor (Fig. 8).
2) Press top and bottom switches off (O) and
lower handle to vacuum carpet (Fig. 9).
How to Maintain Your Vacuum Cleaner
Make sure vacuum cleaner is turned off and power cord is unplugged
Check Cogged Belt. Replace if worn, cut or out of shape
Avoid touching the motor shaft when checking brush roll or belt.
!
!
Maintain Brush Roll
Motor can become hot with normal use.
Do not remove end caps. Remove hair and threads from brush roll periodically.
PN80241A_Plus.eng OG.qxp :80241A_english 12/22/08 3:41 PM Page 6