Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
4
How to Maintain Your Vacuum Cleaner
Make sure vacuum cleaner is turned off and power cord is unplugged
1) Remove HEPA filter. See directions
on page 2 for removing the HEPA filter.
2) Unscrew the lens and remove old
bulb (Fig. 10).
3) Push in new bulb, replace lens cover
and replace screw (Fig.11).
4) Replace HEPA filter, filter door, foam
filter and frame. Secure dust cup.
Change Light Bulb
– Part number 57940-3
Make sure vacuum is turned off and power cord is unplugged.
1) Use handle release to lower handle.
Turn vacuum over and remove
4 screws (Fig. 1).
2) Turn vacuum over to front side and
remove brush roll cover (Fig. 2).
3) Slide belt off brush roll motor gear.
Remove the brush roll and belt ( Fig. 3).
4) Place new belt around the brush roll.
Place brush roll into the base, then
place belt onto the motor gear (Fig. 4).
5) Rotate brush roll 2 turns to center
belt (Fig. 5).
6) Replace brush roll cover (Fig. 2).
7) Replace screws
&
closest to
the brush roll first. Then replace
screws
&
(Fig. 6).
Check Cogged Belt if Broken, Cut or Out of Shape
– Part number 72393
Avoid touching the motor shaft when checking Cogged Belt.
!
!
!
!
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 1
Brush Roll Indicator Light
Turn vacuum off and unplug if
indicator light turns on.
1) Remove debris that caused the brush roll
motor to stall (Fig. 7).
Brush Roll Reset Button
1) Press reset button on the side of the
brush roll cover to reset motor (Fig. 8).
2) Press top and bottom switches off (O) and
lower handle to vacuum carpet (Fig. 9).
Fig. 7
Fig. 8
Fig. 10
Fig. 11
Fig. 9
Fig. 3
Maintain Brush Roll
– Call Eureka Customer Service HELPLINE – Part number 62365-4
Motor cam become hot with normal use.
Do not remove end caps. Remove hair and threads from brush roll periodically.
