Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
4
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 1
How to maintain your vacuum cleaner
Make sure vacuum cleaner is turned off and power cord is unplugged
Check U belt. Replace if worn, cut or out of shape.
Avoid touching the motor shaft when checking
brush roll or belt.
!
!
Maintain brush roll
Motor can become hot with normal use.
Do not remove end caps. Remove hair and
threads from brush roll monthly
How to replace brush roll or belt
1) Use handle release to lower handle
flat onto floor (Fig. 1).
2) Remove 2 screws from the front side of
brush roll cover (Fig. 2).
3) Lift and remove brush roll cover (Fig. 3).
4) Remove brush roll and belt. Thread new
belt around motor shaft and right end of
brush roll (Fig. 4).
5) Pull right side of brush roll to stretch belt.
Secure right end cap into base (Fig. 5).
Align left end cap with square in base
and push into place.
6) Rotate brush roll 2 turns to center belt
(Fig. 6).
7) Replace brush roll cover and 2
screws (Fig. 2).
How to clear debris from brush roll
1) Refer to Fig. 1, Fig. 2 and Fig. 3.
2) Use scissors to clip hair and threads
(Fig 7).
3) Replace brush roll and 2 screws (Fig. 2).
How to adjust for carpet height
1) Adjust height setting for high, medium,
or low carpet (Fig 8).
2) If vacuum is not cleaning carpet, turn
knob to lower position. If vacuum is hard
to push, adjust knob to higher position.
