IMPORTANT
DO NOT OPERATE THE UNIT WITHOUT FILTERS AND UV LIGHT INSTALLED
1.
One Pre Filter, one HEPA Filter, One Ultra-violet Light, One Silver Nano Activated
Carbon Filter and One Photocatalyst Filter are pre-installed. There is nothing further
to install in order to start using the unit.
2.
To use the built-in Aromatherapy function, press the cover in to release the tray then
add the essential oil of your choice to the cotton pad and push the tray into the unit.
3.
Plug the adapter into the proper power source.
4.
Press the button to turn the unit ON and the LED on the upper side will glow RED.
Press the button again to turn the unit OFF and the LED Light will also turn OFF.
The Ionizer and UV Light will always be on when the power for the unit is turned ON.
5.
Press the button to adjust the airflow to HIGH (Green indicator) or LOW =
(Blue indicator).
PLEASE NOTE:
•
For quick air cleaning, set the Speed Control to HIGH setting. After about 30 minutes,
set the Speed Control to the LOW speed setting
•
To maintain fresh air at all times, set the Speed Control to LOW speed setting. The
unit uses very little electricity
•
For quiet use in the evening, set the Speed Control to LOW speed setting
OPERATING INSTRUCTIONS
3
Summary of Contents for Pure Air
Page 7: ......
