13
1.
Unit Dimension (wxdxh) in mm
310 x 238 x 435
2.
Net Weight (unit + plumbing kit)
5.88 Kgs
3.
Flow Rate
2 Litres/Minute (max.) (depends on input water pressure and condition of the filters)
4.
Input Voltage
230 V AC/50 Hz
5.
Power Rating
25 -30 Watts (Max)
6.
Input water temperature
10° C to 40° C
2
7.
Input Water Pressure (Minimum)
0.4 Kg / cm
8.
Input Water Pressure (Maximum)
2.0 Kg /
(If the pressure is more, use of PRV is mandatory)**
9.
Input Water Turbidity
10 NTU Max
10.
Input Water Iron
0.3 ppm Max
11.
Input Water Chlorine
2 ppm max
12.
Stage 1
Clarity Cartridge
13.
Stage 2
HCCB Cartridge
14.
Stage 3
Mineral Guard
15.
Stage 4
Firewall UV lamp
17.
Solenoid Valve (Anti-drip)
18.
Recommended TDS Level
500 mg / Litre (Max.)
2
cm
2
12 V DC, Max. Operating Pressure 4.0 Kg/cm
Note:
The performance data presented in the table is applicable under standard laboratory conditions. Actual performance may vary depending on the input water quality, water pressure and
condition of filters.
*
Technical Specifications are subject to change without prior notice.
**
If the pressure is higher than the maximum specified, use of the pressure reducing valve is recommended. The above accessory is available with our company at an additional cost.
TECHNICAL SPECIFICATIONS*
