13
RECOMMENDED INPUT WATER QUALITY
Note: The performance data presented in the table is applicable under standard laboratory conditions.
Actual performance may vary depending on the input water quality, water pressure and condition of
filters.
*
Technical Specifications are subject to change without prior notice.
If the pressure is higher than the maximum specified, use of the pressure reducing valve is
recommended. The above accessory is available with our company at an additional cost.
Performance Data Sheet is available with Eureka Forbes Technical Documentation Centre
S.No.
Parameters
Specifications
1
Water Temperature
10
º
C ~ 40 C
2
Iron Content
0.3 mg/ltr (max.)
3
Chlorine Content
0.2 mg/ltr (max.)
4
Turbidity
15 NTU (max.)
5
TDS Range
<500 mg/ltr
º
