IMPORTANT SUGGESTIONS
DOs
• When your Aquaguard
®
Select is not in use, please keep the outlet spout covered with
the cap.
• Turn OFF the main switch if you do not use your Aquaguard
®
Select for more than 3-4
hours.
• Store water from your Aquaguard
®
Select in clean containers. For hygiene reasons, it is
preferable not to store water for more than 2 days.
• We recommend routine check-ups for your Aquaguard
®
Select at least once in 6 months.
• If your Aquaguard
®
Select has not been used for a long time, allow 2-3 glasses of water
to flow out before collecting the water for use.
DON’Ts
• Spill water on any panel as this may lead to shock.
• Store water from your Aquaguard
®
Select in matkas and candle filters, as the water
can get recontaminated.
• Use an extension box for power connection.
• Connect it to a hot water supply source.
• Install your Aquaguard
®
Select close to a gas stove or cooking range.
• Cover the product with plastic or cloth. Putting a cover on the product may cause
damage to the product.
INDICATION CHART TO USE
AQUAGUARD
®
SELECT
with AYURFRESH
TM
Fit the adaptor into the socket and switch ON the mains. The 3 LEDs 2,3 & 6 will
blink in blue and green once, indicating that power is ON.
1
After 5 seconds, the LEDs will go OFF one by one, rotating clockwise and will
continue for 30 seconds, indicating the unit is processing.
2
Once the processing is complete, all LED lights will become solid-fixed, indicating
the readiness to dispense water.
3
To dispense normal water, touch and leave the centre area of LED indication.
During dispensing, a blue colour single LED rotates in clockwise direction.To stop
the water flow, retouch and release the centre area of LED indication of Ayur icon.
4
If the unit is not used for a stipulated time, it will proceed to a standby mode which
is indicated by a single solid LED indication. To collect water, just touch the centre
area of LED indication.
5
If all the LEDs blink it indicates SV/Pump Fault/LDR/UV Lamp fault.
6
All LEDs Blink
If the filter’s life is nearing its end or if filter life is exhausted, LED 2, 3 & 6 will be
solid. Respective filter cartridge which has reached end of life will blink.
Combination cartridge is represented by LED 5 and Active Copper Maxx by LED 1.
First Warning:
Blinks once every 3 seconds
Second Warning:
Blinks twice every 3 seconds
End of Life:
Blinks thrice every 3 seconds. Unit seizes at end of life
(Applicable for Aquaguard
®
Select EA Model only)
7
During installation and when the unit has not been used for 2-3 weeks, the water
inside the unit has to be flushed out. To activate flushing, touch and hold the centre
area of the LED for 10 seconds. Flushing will start (indicated by the anti-clockwise
rotation of the LED) and stop after the stipulated time. In case you wish to stop the
flushing, retouch the centre area of LED.
Caution: Do not drink the water that comes out of flushing mode.
8
To dispense Ayur water simply touch and release the Ayur button. A green colour
single LED will rotate in clockwise direction while the water is dispensing. To stop
dispensing, touch and release the Ayur button
9
FUNCTION
INDICATION OF
THE UNIT
Sr.
No.
Note: Refer to the LED numbers assigned for each LED to understand indication chart.
Turn OFF the main switch and the water supply if you do not plan to use the unit for 3-4 hours and more.
Enhances the taste of the water and increases the
level of essential minerals which helps in improved
health and body functions. At the same time,
balancing the pH of water, making it healthy.
*IS 10500:2012 Drinking Water Specification (Acceptable Limit)
Generates electronic impulses which prevent
scaling/deposition of Calcium and Magnesium on the
quartz glass tube of the UV reflector chamber,
thereby ensuring best UV penetration through quartz
glass into the water column, and at the same time
keeping essential minerals like Calcium and
Magnesium intact in water.
Breaks complex water molecules into fine micro
clusters, making water more bio-permeable so that
your body can easily absorb the goodness of water,
along with its much-needed nutrients.
A unique combination of
naturally occurring vital minerals
like Calcium, Magnesium,
Copper, and Zinc with
anti-microbial carbon granules.
Ayur Cartridge
7.
Cartridge loaded with goodness
of Cinnamon, Black Pepper,
Clove, Cumin, Cardamom,
Tulsi and Ginger.
Ayur Cartridge is a combination of 7 indigenous
herbs and spices, delivering the goodness of
Ayurvedic ingredients in your water, using a patented
(applied) technology.
Combination of sediment filter and activated carbon
block removes physical impurities, as well as reduces
excess chlorine and VOCs from water. It also
absorbs bad taste and odour from the water.
Silver Shield*
6.
5.
4.
A Silver Ion-releasing system
known for its anti-bacterial
property.
Biotron
TM
Cartridge
Active Copper
Maxx™* Cartridge
Micro-controller based
electronic impulse producer.
Mineral Guard™
Multi-layer polypropylene yarn
with activated carbon block.
Combination
Cartridge
Patented Multiple Magnetic
Field (MMF) generating device.
It ensures that the water collected is free from any
possible bacterial and viral contamination,
post-purification.
*IS 10500: 2012 Drinking Water Specification (Acceptable Limit)
UV e-boiling
3.
Germicidal UV Lamp
UV disinfects the water by eliminating waterborne
disease-causing bacteria, viruses and protozoa,
thereby making it safe to drink.
Cartridge manufacturer FSSAI No. 10017041001075
1.
Installation:
Ayur cartridges will be installed by authorised service technicians. It is packed separately in a moisture barrier
pack to get better shelf life and stability. Install the cartridge immediately after opening the pack and seal. Do not use if the
cartridge packaging is open/distorted
2.
Replacement:
Procure the cartridges directly from the authorised service centre of Eureka Forbes and it should be replaced
by a qualified service technician
3.
Additional Information:
Children can use the Ayur water under the supervision of adults. The taste of water drawn from
Aquaguard
®
Select Ayur may vary because of water temperature, pH level, TDS level and flow rate. In case of strong taste, one
can dilute with regular water if needed
THE MULTI-STAGE PURIFICATION PROCESS IN
AQUAGUARD
®
SELECT with AYURFRESH
TM
TECHNICAL SPECIFICATIONS*
#
Technical Parameters
Specifications
1
Dimension (W X D X H)
313 mm X 167 mm X 423 mm
2
Net Weight
4 kgs. (approx)
3
Purification Technology
UV
4
Filtration System
ELECTRICAL SPECIFICATIONS
1
Operating Voltage
150 V AC to 280 V AC, 50 Hz
2
Power Supply
230 V AC External AC/DC Adaptor, 12 V DC, 1.7 Amps
3
Power Rating
20 Watts
4
UV Lamp
11 Watts
RECOMMENDED INPUT WATER PARAMETERS
1
Input water temperature
10°C – 40°C
2
Input water pressure
0.3 to 2 kg/cm
2
3
Input water TDS
Up to 200 mg/litre
4
Chlorine content (max.)
0.2 mg/litre
5
Iron content (max.)
0.3 mg/litre
6
Input water turbidity
(max.)
5 NTU
Stage 1: Combination Cartridge
Stage 2: Mineral Guard
TM
Stage 3: e-boiling / UV Lamp
Stage 4: Active Copper Maxx
TM
Stage 5: Biotron
TM
Stage 6: Silver shield
Stage 7: Ayur Cartridge
AQUAGUARD
®
SELECT with AYURFRESH
TM
*Technical Specifications are subject to change without prior notice.
Note: The performance data presented in the table is applicable under standard laboratory conditions
#
. Actual performance
may vary depending on the input water quality, water pressure and condition of filters. If the pressure is higher than the
maximum specified, use of a pressure reducing valve is mandatory. If the pressure is lower than minimum specified, use of an
external booster pump is mandatory.
The above accessories are available with our company at an additional cost.
Warranty void if product is not installed as per the recommendations.
#
Standard Test Conditions:
Feed Water Quality: TDS Max: 200 mg/litre, Pressure: 1.0 kg/cm
2
, Turbidity: Max. 1 NTU, Temperature: 25°C, Chlorine: Below
0.2 mg/litre, Iron: Below 0.3 mg/litre, Life: 6,000
#
litres (Except Ayur cartridge).
#
Actual performance may vary based on the input water conditions – Turbidity and Pressure.
All technical report and data is available in Technical HQ.
