SD20-G Series
8
I Notes for safe operation
Read this manual thoroughly before checking products on delivery, storage and transportation, installation, wiring,
operation and inspection, and disposal of the servo drives.
WARNING
·
Do not touch terminals for five minutes after voltage resistance test.
·
Do not touch terminals for five minutes after the power is turned off. Residual voltage may cause
electric shock.
·
Never touch any rotating motor parts while the motor is running.
·
Never touch the inside of the SERVOPACKs.
·
Follow the procedures and instructions for trial operation precisely as described in this manual.
·
Do not remove the front cover, cables, connectors, or optional items while the power is ON.
·
Do not damaged, press, exert excessive force or place heavy objects on the cables.
·
Do not change the max speed value (Po002) except special purpose. Failure to observe this warning
may result in damaged to products.
·
Do not come close to the machine Immediate after resetting momentary power loss to avoid an
unexpected restart. Take appropriate measures to ensure safety against an unexpected restart.
·
Do not modify products. Failure to observe this warning may result in injury or damage to products.
·
MCtt (electromagnetic contactor) and NFB (no fuse breaker) must be installed between main circult
power
（
L1/R, L2/S, L3/T for 3-phase).
Summary of Contents for SD20-G Series
