6
4. ouTDoor sTaTion configuraTion
Note:
Before assembling the outdoor station it is highly advised to perform its configura
-
tion according to installation rules. It the configuration is successful the user can assemble
the outdoor station.
Necessary technical requirements:
−
Router with active Internet connection,
−
Tablet / smartphone equipped with speaker, microphone, Internet connection possibility,
−
Properly installed Eura Video IP app.
There are two ways to connect the outdoor station to router:
−
WiFi (2.4 GHz) wireless connection,
−
RJ45 Ethernet cable connection.
Configuration is possible only with the use of Wi-Fi connection.
4.1. seTTing facTory DefaulTs
If the outdoor station is connected to a new WiFi router, you need to set the outdoor sta-
tion to factory default status first.
To set the outdoor station to factory default status the user must:
1. Cut off the power.
2. Power on again.
3. Hold the calling button for around 45 seconds until the LED light flash and a “Bi...” sound
will be heard.
4.2. Wi-fi Wireless connecTion
Note:
Make sure, that the outdoor station is configured with tablet / smartphone. Don’t
move the antenna during installation process described below.
4.2.1. Wi-fi Wireless connecTion from ios sysTem
1. Connect the WiFi to which the outdoor station is connectected.
2.
Open the Eura Video IP App. (on tablets with iOS please tick the option “Only iPhone”).
3.
Click “Dodaj urządzenie” (“Add a Device”).
4.
Click “Dodaj nowe urządzenie” (“Add a New Device”).
5.
Click “Rozpocznij konfigurację” (“Start configuring”).
5.1. Prompt “Skonfiguruj WiFi (“Please config WiFi”) will appear. Confirm by clicking OK
and exit the Eura Video IP app.
5.2. In Wi-Fi settings of a device the new network will appear (named LIDxxx, where
xxx is the identity GID of a video doorphone). Choose this network and connect.
5.3. Come back to Eura Video IP app.
6.
Click “Dodaj urządzenie” (“Add a Device”).
7.
Click “Dodaj nowe urządzenie” (“Add a New Device”).
8.
Click “Rozpocznij konfigurację” (“Start configuring”).
9.
Choose the WiFi from your own router, input its WiFi password, click “Ustaw” (“settings”).
10. The prompt about device restart will appear and you will have to wait for about 1 min.
Confirm by clicking OK.
11.
Input the default User Name – Nazwa użytkownika (admin) and Password - Hasło
(1234), click “OK” to confirm.