8
4.4.3.
„Send Passcode”
- these are access codes sent to door handle set users
(guests, employees, visitors), in order to send an access code, click ‘Send Pass-
code’ icon, and:
4.4.3.1.
select the code type:
-
permanent
- the code must be used at least once within 24 h from
being established, otherwise it loses validity;
-
timed
- the code must be used at least once within 24 h from being
established, otherwise it loses validity;
-
one-time
- single-use code - the code must be used at least once
within 6 h from being established, otherwise it loses validity;
-
erase
- erasing code, should be used within 24h, otherwise it ex-
pires. After its application all codes assigned to the given device are
erased. In order for the code list in the app to be cleared, perform
app and door handle set synchronization, this is best done using
door opening via the lock icon;
-
customized
- manual code - enables full personalization of code
thanks to the possibility to select the operation time and the code
number (4-9 signs);
Note:
option available only in the case when the mobile device re-
mains within the operating range of the door handle set’s Bluetooth
module;
-
cyclic
- cyclic code enables setting access according to the scheme,
it is possible to select the day of the week and hours for the code to
work - the code must be used at least once within 24 h since being
established, otherwise it loses expires.
4.4.3.2. generate code by clicking ‘Generate’
4.4.3.3. click the icon of square with arrow in the upper right corner of the
app.
4.4.3.4.
From the list, select the code transmission method:
-
- the code will be sent via WeChat app, under the condi-
tion the WeChat app is configured;
-
Text Meg
- the code will be sent via a text message- the text
message will contain a template with information on the access
code, its expiry date etc. - it is possible to edit any text mes-
sages;
-
- the message will be sent via e-mail, under the condition
of possessing configured e-mail account on the mobile device.
4.4.4.
eKeys
- list of generated and sent access codes - with information on keys -
key type, activity status - it is possible to remove the given key from the list,
in order to remove press and hold the given key until ‘Delete’ button appears,
upon its clicking the key becomes permanently deleted.
NOTE:
Removing an active key from the list in the app prior to its expiration
is possible, in order to remove, the device with the app must be connected to
the Internet, and the key will be removed only when the person receiving the
key is also connected to the Internet. Information on premature key removal
will be downloaded from server.
