8 Appendix FAQ
8.1 I have got multiple alarms during the connection process
It is completely normal to get alarms during these processes as the sensors you are connecting are at room temperature
when first plugged in. Be aware that you do not continue to get these alarms.
8.2 The light does not turn on when I press the Eupry Button
Look at the user manual for the Data Logger on
8.3 The Data Logger does not light green when I release the button
Look at the user manual for the Data Logger on
8.4 Where can I see the ID of the Data Logger and ID of the External Sensor?
We have two kinds of barcode labels. The two pictures below illustrate where the ID can be found.
The ID of this Data Logger is the last four digits on the side of the Data Logger. The ID of the sensor is the digits on it (see
figure).
The ID of this Data Logger is the last five digits on the side of the Data Logger. The ID of the sensor is the digits on it (see
figure).
9 Support
Please visit the Eupry Support Centre for any support enquiries. This can be accessed by selecting the “Support” button when
logged in to the Eupry Monitoring.
Alternatively, please contact support using the information provided in the footer.
User Guide: Differential Pressure Sensor, P4P
Rev. 0.1 -May 2022
Page 5 of 6
Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ |
+45 53 51 77 00
|