Euphonix System 5B, Operation Manual

Page: 133 / 156

System 5-B Digital Audio Mixing System Operation Manual Layouts and Snapshots
133
10.1.5 Delete a Layout
1. Press the Clr key at the bottom of the Layout Panel so it begins flashing.
2. Press the key corresponding to the Layout to delete.
That key’s display darkens and the name returns to the default (i.e., L #).
10.2 Snapshots
A Snapshot stores selected channel functions, switch states, fader and pan settings, and
routings for a selected number of channels. System 5 provides easy methods to store:
• An individual function parameter or switch state;
• The current Knobset function;
• All functions from one or more channels;
• All functions from all channels currently on console surface;
• All functions in all channels in mixer model.
The number of Snapshots that can be stored within System 5-B’s pre-defined memory
area depends on the content of each Snapshot. There are 240 storage locations but only
a fraction of these can be used in the largest console configuration, with all settings
stored for all channels.
10.2.1 Create a New Snapshot
1. From the Main Panel , press the Snapshot key to display the Snapshot Panel .
The button beside the last Snapshot recalled is illuminated.
2. Press the New key at the bottom-left of the Snapshot Panel.
The New key flashes to signify creation of a new Snapshot.
3. Select the function(s) to include in the Snapshot using any of the following
methods:
Individual Function or Channel Parameter
Press a Strip function’s parameter key or switch to select only that parameter
(i.e., High EQ, fader on/off, etc.).
Current Knobset Function
Press the Knobset Select switch at the top-right of the Strip or the Func Sel
switch (to the left of the * key) to select all parameters for the current knobset
function in the current channel (Main or Swap).