Euphonix is Avid.
Learn more at
www.avid.com
Connections
Rear Panel
1.
VGA Connector
(DA-15): Main video monitor connection.
2.
Keyboard
(PS/2): Main keyboard connection.
3.
Mouse
(PS/2): Main trackball connection.
4.
Serial Port 1
(DE-9): Com1; currently not used. (Com2 is wired internally to the SNMP
board’s Com port.)
5.
Serial Port 2
(DE-9, top) and
Serial Port 3
(DE-9, bottom): Com3 and Com4,
respectively; currently not used
6.
TT002
(75-ohm BNC, DE-9 female, DE-9 male): BNC port is for Bi/Tri-Level Video
input; DE-9 female is for RS422 (Sony 9-pin); DE-9 male is for Midi Machine Control
and Time Code I/O (via breakout cable).
7.
GPIO Port 1
(DC-37): GP Inputs and Outputs 1 to 16.
8.
GPIO Port 2
(DC-37): GP Inputs and Outputs 17 to 32.
9.
LAN Port 1
(Onboard RJ45): Connect to EuCon Network Switch via RJ45 (provided).
10.
LAN Port 2
(Auxilary RJ45): Optional connection for external network.
11.
SNMP LAN Port
(RJ45): Connect this port to a network with SNMP monitoring or e-
mail services to enable the hardware monitoring system to report errors.
12.
USB Ports:
Connect the USB MIDI Interface to one of these ports. Connect a USB
memory device to one of these ports for file backup, application installations or updates.
13.
Power Connectors
(IEC): Accepts two standard IEC power cords (provided). Two auto
ranging switching supplies accept voltages between 100–240 VAC, 50–60 Hz.
14.
TCC Main Port
(DC-62): Connect TCC breakout cable (provided) to this port. This
cable breaks out to four DA-15 connectors that provide control hookup for the MC524
Monitor Interface and three ML530 Mic/Line Interfaces.
15.
TCC Extension Port
(DC-62, optional): Connect a second TCC breakout cable to this
port connect up to four a to dditional ML530 Mic/Line Interfaces.
16.
SNMP Serial Port
(DE-9): This port is used to configure the SNMP card via another
computer.
