CMOS Setup Utility
Quick Power On Self Test
This item speeds up Power On Self Test (POST) after you power up the computer. If it
is set to Enable, BIOS will shorten or skip some check items during POST.
The optional are: Enabled,
Disabled (Default)
First / Second / Third Boot Device
The BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The optional are:
Floppy (First Default), HDD-0(Second Default), LS 120 (Third
Default)
, HDD-1/2/3, ZIP 100, SCSI, CDROM, LAN.
Boot Other Device
The BIOS attempts to load the operating system from the other device in the sequence
selected in these items.
The optional are:
Enabled (Default)
, Disabled
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical drive B to logical
drive A and vice-versa.
The optional are: Enabled,
Disabled (Default)
Boot Up Floppy Seek
Seeks disk drives during boot up.
The optional are:
Enabled (Default)
, Disabled
Boot Up NumLock Status
Selects power on state for NumLock.
The optional are: Off
,
On
(Default)
Gate A20 Option
Normal-a pin in the keyboard controller controls Gate A20. Fast lets chipset control
Gate A20.
The optional are: Normal,
Fast (Default)
3-7
