•
Try to shorten opening time of cooler’s door.
•
Avoid putting warm beverages in the cooler.
FAULT CODE
DESCRIPTION
E1
R Room sensor failure
R room defrost sensor failure
E4
9
It is recommended you install the appliance in a place where the ambient temperatures is above 60°F (16°C) and below 90°F (32°
C). If the ambient temperature is above or below recommended temperatures, the performance may be affected. For example,
placing your appliance in extreme cold or hot conditions may cause interior temperatures to fluctuate.
• The cooler should be placed in a room that is dry and ventilated. The cooler cannot be placed under direct
sunlight or next to heat source (such as a radiator, stove, etc.), and a suitable insulation board must be applied
if necessary.
This beverage refrigerator is equipped with an internal fan that
prevents uneven temperature distribution, ensuring
all of your beverage reaches your desired temperature .
2.Memory Function
If turned off, this cooler will remember any settings in place and
will work according to those settings once it’s turned on again.
4.Temperature Se
tt
ing
Press the increase temperature button to increase the temperature
one degree at a time. Press the decrease temperature button to
decrease the temperature one degree at a time.
5.Fault Indicators
If any of these indicators are displayed it means the cooler
has the following issues.
INTRODUCTION TO THE BEVERAGE COOLER’S FUNCTIONS
Display Controls
When turning on for the
fi
rst time, the display screen will be
a full display for 3 seconds and the startup
tone will ring.
PROPER USE OF BEVERAGE COOLER
Energy Conservation
3.Lighting
Press the lighting button to turn the light on or off.
6.INTERNAL FAN
Temperature Control
1.Standby Mode
To activate standby mode, hold the standby button for 3
seconds. You will hear a beep and the display area will be
cut off. To deactivate standby mode, press the button again.
You will hear a beep and the standard
display will show.
Temperature Rise Key
Temperature Drop Key
Note:If you want to switch between Celsius and Fahrenheit, press and hold the Drop key and Rise key simultaneously for 3
seconds, the temperature can be converted.
