background image

04 EN

EN 05

• This device has been designed to be used on floors 

without scratching them. We recommend that you test 

this device on a small area of the room to be cleaned to 

ensure no scratches are made before cleaning the whole 

room. 

•  Only use attachments recommended or described in this 

manual.

• Do not handle the device or plug with wet hands.
• Ensure that the dust bag and/or filters are correctly in 

place before use.

• Do not use a battery pack or device that is damaged or 

modified. Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion, or risk 

of injury.

• Do not expose the battery pack or device to fire or 

excessive heat. Exposure to fire or temperatures above 

130°C / 266

 may cause an explosion.

• Do not modify or attempt to repair the device or the 

battery pack, except as indicated in the instructions for 

use and care.

• Follow all charging instructions and do not charge the 

battery pack or device outside of the temperature range 

specified in the instructions. Charging improperly or at 

temperatures outside of the specified range may damage 

the battery and increase the risk of fire.

Notice

This symbol on the device or its packaging 

indicates:
Do not dispose of electrical appliances as unsorted 

municipal waste; use separate collection facilities. 

Contact your local authority for information 

regarding the collection systems available. If 

electrical appliances are disposed of in landfills or 

dumps, hazardous substances can leak into the 

groundwater and get into the food chain, damaging 

your health and well-being. When replacing old 

appliances with new ones, the retailer is legally 

obliged to take back your old appliance for disposal 

free of charge.

FCC Statement

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired operation.  

Warning:

 Changes or modifications not expressly 

approved by the party responsible for compliance could 

void the user's authority to operate the equipment.

Note:

 This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful 

interference in a residential installation.
This equipment generates, uses, and radiates radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

Summary of Contents for Clean G35+























Reviews: