07
08
Safety
Warning
Strangulation Hazard: Children have STRANGLED in cords.
Keep this cord out of the reach of children (more than 1m (3ft)
away). Never use extension cords with AC Adapters. Only use
the AC Adapters provided.
This device in compliance with the essential
requirements and other relevant provisions of Directive
2014/53/EU. All essential radio test suites have been carried
out.
This product can be used across EU member states.
The product shall only be connected to a USB Interface of
version 2.0 or higher.
1. The adapter shall be installed near the equipment and shall
be easily accessible.
2. Do not use the product in the environment at too high or too
low temperature,
never expose the mobile phone under strong sunshine or too
wet environment.
The suitable temperature for the product and accessories
is -20°C-60°C.
When charging, please place the product in an environment
that has a normal room
temperature and good ventilation. It is recommended to
charge the product in an environment
with a temperature that ranges from -10°C~45°C. Please
ensure to use only the charger offered by the manufacturer.
Using unauthorized charger may cause danger and violate the
authorization of the phone and the guarantee article.
3. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
4. RF exposure information: The Maximum Permissible
Exposure (MPE) level has been calculated based on a distance
of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device
and human body.
6. Operating Frequency Range: 2410-2477MHz
7. The charger output voltage/current is 5Vdc/2A. The plug
considered as disconnect device of adapter.
8. If you use a third-party charger, the recommended output
voltage/current of the adaptor is 5Vdc/2A,and the adapter
shall be CE approval type.
9. The following importer is the responsible party (contact for
EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham,United Kingdom B11 2AA
