06
07
2. Connect the other end of the charging cable to a standard USB port of your spare
universal USB charger. The Smart Buoy will flash red, indicating it’s charging.
3. Once the Smart Buoy flashes green, it’s fully charged.
Note:
•
Make sure you seal the charging port with the waterproof cap before putting the
Smart Buoy into your pool.
•
Dry the device properly before the next charge.
TETHERING OR MOUNTING THE SMART
BUOY (OPTIONAL)
The ideal monitoring spot in your pool is approximately 1.5m away from the water outlet.
After locating this spot you can either mount the Smart Buoy using a mounting kit (sold
separately) or use the provided rope to tether the device to your pool ladder.
To tether the Smart Buoy, use the provided rubber band to tie the rope to the sensor. Then
tie the other end of the rope to your pool ladder.
To mount the Smart Buoy you must first purchase the mounting kit. Identify the ideal
monitoring location and install the mount. Place the Smart Buoy on the mount.
