19
2527247-01-09/19 (Translation of the original operating instructions)
Operating Instructions
Safety System MGBS-P-I-AP…
EN
11.6. Connection of MGBS-I-AP
Connect the device as shown in
. The monitoring outputs can be routed to a control system.
WARNING
If there is a mistake, loss of the safety function due to incorrect connection.
Ì
To ensure safety, both safety outputs (FO1A and FO1B) must always be evaluated.
Important!
Ì
The example shows only an excerpt that is relevant for the connection of the MGBS system.
The example illustrated here does not show complete system planning. The user is responsi-
ble for safe integration into the overall system. Detailed application examples can be found at
www.euchner.com. Simply enter the order number of your interlocking module in the search box.
All available connection examples for the device can be found in “Downloads.”
Connected load
Safety Outputs
Door
Monitoring
Read Head
Actuator
Monitoring Outputs
FO1B
4
OI
5
Diagnostic
-B1
UB
2
1
n.c.
n.c.
8
0 V
UB
7
OD
6
FO1A
3
MGBS
1
2
-F1
24V DC
0 V
24V DC
0 V
Figure 4:
Connection example, version with plug connector M12