11
2121341-06-11/20 (Translation of the original operating instructions)
Operating Instructions MODULAR SAFETY CONTROL SYSTEM MSC
MSC FIELDBUS MODULES CE-...
EN
4.3. Configuration of the input and output structure
FW < 2.0
The input and output structure can be configured using the software application Bus Configurator
– User Interface. Backward compatibility must be set under Settings -> Activation for this purpose.
Important!
The compatibility mode functions only in combination with a base unit MSC-CB or with a fieldbus module
with a firmware version < 2.0.
Figure 5:
Bus Configurator – User Interface, compatibility mode
FW < 2.0
The “Backward Compatibility” tab appears after the compatibility mode is set, see Figure 5. The “I/O
Select” area can be used to define the sub-sections to be exported on the fieldbus. In this way, the
size of the structure and therefore the usage of the internal memory in the PLC can be defined.
