background image

                                                                                                 

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

 

EUCT01 User Manual V01.1   

                                                                              5                                                                     

www.euchips.com 

 

         

 

Figure 16                                                    Figure 17 

5.4.3 Backlight 

When the backlight is set to "ON", the display unattended operation over 60s, LCD will enter clock mode

show the 

current time and date. After 60s, LCD will automatically enter the sleep mode, press any key to end the sleep mode, 

enter the setting state.   

When the backlight is set to "OFF", the display will remain the current setting state. 

             

             

 

Figure 18                                                Figure19                                                  Figure 20 

5.3 System Info   

In this menu, the current system information can be displayed, which is shown as follows: 

 

Figure 21 

Line 1:                                        Device model 

Line 2:                                        box and GUID 

Line 3:                                        the current date 

Line 4:                                        the current time 
Line 5:                                        “Euchips co.,LTD.” 

Summary of Contents for EUCT01







Reviews: