/
Installation instructions
1. Make a 360 x 360 mm square installation opening in the roof and apply a double-sided sealant
between the mounting flange of the ventilation fan base and the roof surface. And paste the
waterproof tape. (Pls make the surface level and flat, or will cause rainwater to pour in.)
2. Put the fan into the square mounting hole on the roof, press tightly and fix the fan with screws.
Apply enough sealant on the roof where the fan base mounting flange and the roof meet to
prevent rainwater in. (If the roof is a sandwich structure, a wooden strip should be added in the
middle of the sandwich to reduce vibration at the opening).
3. Connect the ventilation fan power cable to the 12V power in the car (
the red wire
is the positive pole, and the black wire is the negative pole
).
4. Insert the ventilation fan garnish frame into the square mounting holes and fasten it
with screws.
Summary of Contents for F36AR
Page 2: ......
