Instructions for startup by one person
• Place units next to each other.
• Turn on all Talker Units that will be used.
• Press and hold on/off button until green light blinks (approximately one
second).
• Turn on the Listener Unit.
• Press and hold on/off button until green light blinks (approximately one
second). The Listener Unit seeks all Talker units while the green light is
blinking. A solid green light on all units indicates a connection.
• Plug earphones into the jack on the Listener Unit (see Figure 2).
• Distribute the units.
• Instruction all users to put the cord around the neck; the green light
faces out. Users adjust the neck cord so the unit rests comfortably
under the chin (see Figure 1).
VOLUME CONTROL
(Up/Down Switch)
For ease of use, the top of the button (Up) has a
ridge, the bottom part of the button (Down) has
a groove.
Volume Adjustment should be determined
by the Listener.
After all Talker Units are on, the Listener can
determine if adjustments are needed. The
Listener Unit has a master volume control.
Note:
It is seldom necessary to adjust the
volume control on any of the Talker Units. If any talker is unusually soft
or too loud, however, the listener can ask that talker to adjust their own
volume control.
6
