4
EN
1.4 Interfaces and Connections
- Connections of the external ports:
MIC: Connect to microphone.
DC12V: Power supply port.
LAN: Network port. It supports PoE power supply.
User can connect the PC and IP-CAMERA in accordance with the above picture. Before connecting, please connect external
devices, and then connect the power.
Zoom: Loosen the screw and rotate the lens left or right to zoom in/out the image.
Focus: Loosen the screw and rotate the lens left or right to adjust the definition of the image.
2 Installation
2.1
Connect IP-CAMERA to Network
The connection of IP-CAM is shown below:
LAN
MIC
Alimentazione
LAN
MIC
Alimentazione
Modem
Switch
LAN
S it h
Internet Computer
Monitor
Power supply
LAN
MIC
Alimentazione
LAN
MIC
Alimentazione
Modem
Switch
LAN
S it h
Internet Computer
Monitor
Power supply
1.3 Installation
The setting steps are as follows:
Step 1: Loosen the screws at the bottom of the dome camera and then take down the installation dish. After that, loosen four
screws in the back box of the dome to take down the back box as shown in the following figure on the left.
Step 2: Install the installation dish on the ceiling and then mount the dome on the installation dish by tightening the screws at the
bottom of the dome camera as shown in the following figure on the right.
Step 3: Adjust the view angle for your need when you view the video on the monitor (If your device cannot support focusing
function, please skip this step).
Step 4: Tighten the screws and install the back box.
Zoom and Focus adjustment
