5.
Notes:
a)
Must use crossover cable for connecting MR-900W to computer and webcam;
b)
MR-900W and the network camera must be in the same network segment. The factory default gateway
IP for MR-900W is: 192.168.1.1, therefore you should set up the webcam’s IP between 192.168.1.2 and
192.168.1.254. Of cause, you may change the gateway IP for MR-900W to other network segment, as
long as you keep MR-900W and webcam in the same network segment.
c)
MR-900W is required after each change the settings to take effect after restart.
Example case 2 Configuring MR-900W for remotely controlling color LED screen
With the popularity of 3G communications, wireless transmission speed is greatly improved, and makes it
possible to remotely control LED color screen. As following, we illustrate how to connect MR-900W with
C-power5000 (DS06T) LED control card to achieve remote control
1.
Preparation for Configuration
♦
On set MR-900W (include antenna)
♦
One piece C-Power5000(DS06T) LED control card
♦
One cross cable
♦
One serial cable to connect C-Power5000(DS06T) to a computer
♦
5V DC power supply
27
Summary of Contents for MR-900W
