ETTI
60V 250A Power Analyzer
I. Installing software for power analyzer
a. Insert the CD into CD/DVD ROM
b. Inside the folder of Power Analyzer PC software, double click SETUP, the installation wizard will
start to operate.
c. Click NEXT in the “welcome to the InstallShield Wizard for Power Analyzer” interface.
d. In the Destination Folder, user can choose to change the location of installation; or just click
NEXT to continue.
e. In the “Ready to Install the Program”, click “Install”, the software will then be installed
automatically to the computer.
f. In “InstallShield Wizard Completed”, click “Launch Power Analyzer” to run the software, then
press Finish.
II. Installing the USB drive
It is required to install the USB drive before usage, in order to ensure the data exchange of the
power analyzer and the computer.
a. Connect the power analyzer to the computer through the USB wire. Do not disconnect the
USB wire during installation. The system will detect new hardware and the installation wizard
will execute.
b. Select “No, not now” in the “Welcome to hardware installation wizard” then press “Next”.
c. Choose “Select from list/destined location” and press “Next”
d. Insert the Power Analyzer installation CD, click “Browse” to find the “USB driver” directory,
then click “Next”.
e. The computer will find the driver and start installing, click finish.
f. At this time, the computer will find another new hardware, the installation method will be the
same as above (a-e)
g. After the completion of the two driver installations, the power analyzer will be able to connect
to the computer to download required data.
Setting
Through the software setting (Open the software, software setting interface)
1. Serial port selection
Set COM1~COM15 to choose the data interface of the computer. (when several serial ports are in
use.)
Firstly, check the serial port setting of the computer: Control>System>Hardware>Driver>(COM &
LPT),
Find the serial number for the connectable COM, choose the corresponding COM serial port in
the Serial port setting] and test its communication status.
Installation of computer software :
3
