ETT Olfactometer 2, Manual

Page: 34 / 64

34
© Emerging Tech Trans, LLC
triggers are active (Figure 58) and especially when using respiratory signal based triggers that inhalation
and exhalations onsets are detected properly (Figure 59).
Figure 58 - Associated device to the previously defined group definitions. Multiple devices are supported!
Figure 59 - All systems ready to go with simulated respiratory settings
Figure 60 - The respiratory signal is also visualized on the top right corner of the paradigm designer incl. detected inhalation and
exhalation onsets.
Paradigm execution is controlled via the Start Paradigm , Stop and Manual Trigger buttons in the top are
of the Paradigm Designer tab. They will be visible based on the current context. A subject ID can be
assigned and will be used in the file names of all protocol files. Once everything is ready, the paradigm
can be started by clicking the
Start Paradigm button.
If set in the Paradigm settings tab, the subject interface will be used and jump into full screen on the
selected screen. If the full screen mode accidentally gets activated on a single screen system, it can be
exited with
ALT + TAB on the keyboard. Once the paradigm is stopped, the screen will jump back to
windowed mode.