ETT ET-Mini Clock4, Manual

Page: 10 / 24

MANUAL OF BOARD ET-Mini Clock4
Tz:xx (Time Zone) = Set Time Zone that has an effect on operation when using Time Base from GPS only; it can
set the value in the range of -9 to +9 (Time Zone of Thailand is +7 (Default)).
La:xx (Language) = This Menu is only available for the model Plus, Box Plus to choose language to tell time via
Speaker. When
TH: Thai Language (Default)
EN: English Language
OF: Mute, especially Power-ON, pressing Remote to listen voice and every hour
VL:xx (Volume) = This Menu is only available for the model Plus, Box Plus to adjust volume of Speaker in
the range of 00-30 (00: Silent, 30: Loudest) (Default = 25)
Pt:xx (Print Time) = Set value for running the Command Print to print the value of Time and Date via Connector
Tx-TTL. When
ON: Print value of Time and Date according to the setting Command’s format throughout
the operation.
OF: Do not print any value of Time and Date throughout the operation (Default)
NOTE: The values that are setup in each Menu, some values are stored in EEProm of MCU; it remains after Power-OFF and
it will be called after Power-ON. Some values are setup for RTC DS3231 and it will be called after Power-ON. So, it needs to
insert Battery Back-Up into the Clock and the all values that are setup for RTC still run correctly although Power-OFF.
How to use Menu Setup Mode: Referred to the diagram of Menus above, it can summarize menus of Setup Mode as follows;
1)
Press Key to enter Setup Mode; the Display shows message “SETUP” for a while and enter the first Main Menu “Time”.
2) Press Key or Key to choose the preferable Main Menu to set value.
3) After chose the Main Menu to set value completely, press Key to enter the sub-menu of the chosen Main Menu; the Display
shows the first chosen sub-menu of the Main Menu.
4) Press Key or Key to choose the preferable sub-menu to set value.
5) After chosen the sub-menu completely, press Key or Key to choose and set the preferable value for the sub-menu.
6) After set the values for the sub-menu completely, press Key to save the value; next, the Display shows the tick sign at the setting
position for a while and user will hear Beep sound twice, it means it can save the value successfully. Next, user can return to step
No.4 to choose the other sub-menus and user can do the same as described above.
After set values for the sub-menu completely but user does not press any Key Save, all setting value is unchanged and not used
after exited this Setup Mode. If user moves to other sub-menu and return the old one, all values is not updated, it is still the old.
Summarily, every time user setup new value for any sub-menu but user does not press any Key Save, this is no any effect on the
operation of the Clock.
NOTE: When pressing Key to save any sub-menu, it only saves the particular value of the sub-menu; it does not save
whole sub-menus of Main Menu. So, every time users setup the preferable value for each sub-menu completely, it always press
the Key to save the value for the particular sub-menu completely.
The value that is related to Config will be saved and stored in EEProm, it remains although Power-OFF; it will be
called and used after Power-ON. For the value of Time, Date, Alarm that is related to Setting Time (except setting Birthday), it
will setup for RTC DS3231; in this case, it has to insert Battery Back-Up and RTC runs correctly although Power-OFF.