ETS SunDome 548V, User Manual, Page: 24 / 36

29731-03A
19
Installation - Door Adjustment
Electrical Connections
At the rear of the booth is an armored
power cable. Connect power cable as
described in
Pre-Installation Planning .
Again, a professional electrician is recom-
mended.
Above the power cable is the input for the
Provision Security system. The booth will
not work without this system connected.
Follow the directions on the next page to
connect your booth to this system.
In the dome of the SunDome® booth are
two speakers capable of handling 25W of
musical power, with a maximum of 80W.
Just above the power cable are two speak-
er inputs to connect to a stereo.
Door Adjustment
The hinges on the doors are adjustable to
allow precise alignment. A simple twist of
the hinge pin moves the door up or down.
Using the illustration below, adjust the
doors so they are the same height and do
not interfere with the pedestal. Adjust the
top and bottom hinges equally so the
doors are supported on both.
When the hinges are set, secure them in
position by tightening the small screw on
the side of the hinge plate.
LOWER
DOOR
RAISE
DOOR
TIGHTEN SCREW
TO LOCK