ETS DBDR-01C, Manual

Page: 12 / 26

4. Installation instructions
4-1.
Set up order of the product
12
1. Checkist before set up
Make sure your car's engine is turned off, parked in bright, safe and flat
surface before you setup device.
2. Set up instruction
① Insert SD CARD to the unit.
Insert the card facing the side with contact side to upward
(Won’
t insert in other direction)
② Attach adhesive bracket.
Attach adhesive tape to mounting bracket by removing protective tape
and adjust mounting position in windshield where unit can receive
good GPS signal.
SD CARD inserting direction Correctively insetted SD CARD
Adhesive tape stick to
the mounting bracket
face firmly. Mounting bracket
should be sticked to
the windshield where
unit has clear view to
sky.