background image

 

 
 

5

4.0 WARRANTY 

 

Electro-Tech Systems, Inc. warrants its equipment, accessories and parts of its 
manufacture to be and remain free from defects in material and workmanship for a 
period of one (1) year from date of invoice and will, at the discretion of Seller, either 
replace or repair without charge, F.O.B. Glenside, similar equipment or a similar part to 
replace any equipment or part of its manufacture which, within the above stated time, is 
proved to have been defective at the time it was sold.  All equipment claimed defective 
must be returned properly identified to the Seller (or presented to one of its agents for 
inspection).  This warranty only applies to equipment operated in accordance with 
Seller's operating instructions. 
 
Seller's warranty with respect to those parts of the equipment which are purchased from 
other manufacturers shall be subject only to that manufacturer's warranty

 

The Seller's liability hereunder is expressly limited to repairing or replacing 
any parts of the equipment manufactured by the manufacturer and found to 
have been defective.  The Seller shall not be liable for damage resulting or 
claimed to result from any cause whatsoever.   

 

This warranty becomes null and void should the equipment, or any part 
thereof, be abused or modified by the customer of if used in any 
application other than that for which it was intended.  This warranty to 
replace or repair is the only warranty, either expressed or implied or 
provided by law, and is in lieu of all other warranties and the Seller denies 
any other promise, guarantee, or warranty with respect to the equipment or 
accessories and, in particular, as to its or their suitability for the purposes 
of the buyer or its or their performance, either quantitatively or qualitatively

 

or as to the products which it may produce and the buyer is expected to 
expressly waive rights to any warranty other than that

 

stated herein. 

 

ETS must be notified before any equipment is returned for repair.  ETS will issue an 
RMA (Return Material Authorization) number for return of equipment.  
 
Equipment should be shipped prepaid and insured in the original packaging.  If the 
original packaging is not available, the equipment must be packed in a sufficiently large 
box (or boxes if applicable) of double wall construction with substantial packing around 
all sides.  The RMA number, description of the problem along with the contact name and 
telephone number must be included in formal paperwork and enclosed with the 
instrument.  Round trip freight and related charges are the owner’s responsibility.  

 

WARNING 

WOODEN CRATES MUST NOT BE USED.  PACKAGING OF DELICATE 
INSTRUMENTS IN WOODEN CRATES SUBSTANTIALLY INCREASES THE 
CONTENT’S SUSCEPTIBILITY TO SHOCK DAMAGE.   DO NOT PLACE 
INSTRUMENTS OR ACCESSORIES INSIDE OTHER INSTRUMENTS OR 
CHAMBERS.  ELECTRO-TECH SYSTEMS, INC. WILL NOT ASSUME 
RESPONSIBILITY FOR ADDITIONAL COST OF REPAIR DUE TO DAMAGE 
INCURRED DURING SHIPMENT AS A RESULT OF POOR PACKAGING. 

Reviews: